Amber Jobs Home - East Anglia - Job search in Norfolk for jobs. - Help . Advertise . Contact . Disclaimer

Share This Page on Facebook

Typical Job ad below for Norfolk or nearby locations (shown as example for job requirements and responsibilities):

-----------------

Example vacancy only:
Welder TIG / Fluxcore

Experienced Welder with TIG / Fluxcore and stainless steel expertise for on-going full time temporary work; will possibly go to permanent for the top workers.
Reliable experienced people needed - several positions available .
Please note this job for Welder TIG / Fluxcore was advertised some time ago and is now withdrawn.
1. This was an urgent and confirmed vacancy for immediate start.
2. . Many opportunities within the organisation. .
(N.B. Welder TIG / Fluxcore is shown for research purposes only.)

Find Kings lynn or Fakenham as well as Norfolk jobs on the right.

-----------------

Email this page to a friend

You can send this page to a friend or perhaps your home computer so you can look again later?
Your email is not seen or processed by us. When you click this link you will simply be forwarded to your own private email account on your computer. Details of a link to this page will appear.

It is 100% safe!

Norfolk jobs


As well as jobs in Norfolk find on Amber Jobs a range of vacancies such as jobs in Diss, jobs in Yarmouth and Plumber Jobs in Fakenham. Also Roofer vacancies in Aylesham.

Increase your job chances and Register now for possible future

Carpenter Jobs in Norfolk

 

- Takes 2 mins - New jobs by Email as soon as they are posted onto the internet - Let Employers find you!!!!


Jobs updated:

 

Over 100,000 jobs nationwide

Also try....: Part Time Carpenter Jobs in Norfolk *

Carpenter jobs or similar/near:
Norfolk
Updated: 25/07/17


Master Metal Decorator

Location: Norwich Norfolk Jobs

Key points: Operation of multi-colour lithographic printing machinery. Part of a developing team in the Printing Department with responsibility for production, quality and housekeeping on the print line. Working with a Varnisher who is responsible for the set-up of a FOV unit, and an auxiliary working on the unloader at the back end of the print line. Duties/responsibilities ·Set up print line, including wash ups, plate changes, new colour setting and fit.· Run print line and take overall responsibility for the production, quality and spoilage on the line. On-line quality check control/sheet inspection Complete relevant paperwork Print machine maintenance where required and necessary, and housekeeping on line.· Manage Assistants· To be responsible for personal safety and that of others. assertiveness, influencing others, or taking the lead among them.Solving problems, requiring a logical approach.· High level of customer care awareness ..........

17/07 * - Coded Welders, Pipe, Mech Fitters,Welder Fabs    Location: Diss Norfolk Jobs

Key points: FULCRUM ENGINEERING & TECHNICAL OUR ACTING AS AN EMPLOYMENT BUSINESS ON BEHALF OF OUR CLIENTS WE ARE RECRUITING SKILLED & EXPERIENCED PERSONNEL SUCH AS : JOB TITLE ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

12/07 * - Fitter/Welder    Location: Thetford Norfolk Jobs

Key points: Job Title: Fitter/Welder Location: Watton Salary: £19-22k Fitter/ Welder My client are a leading manufacturer of heating and control systems . Duties/Vacancy responsibilities: To carry out TIG welding including the day to day set-up and routine maintenance of the welding plant. To have experience in ASME codes. To ensure all welding consumables are maintained and reviewed regarding stock levels and re-ordering To assist in any In-house Training of any New / Trainee welders to bring them up to a coded standard To take more of a lead in assisting and organizing with the Production planner to ensure work in carried in a timely manner. To do other manufacturing functions of fitting and welding in accordance with the relevant standards and any other standards which may apply to these functions To comply with the Health & Safety regulations in place at the time £9.50 - £11.00 p/h 39 hour week, from 8.00 am - 4.30 pm Monday to Thursday and 8.00 am - 3.30 pm Friday. Technique Recruitment Solutions are a expert Engineering Recruitment company ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

06/07 * - Welder Fabricator    Location: Elsing Norfolk Jobs

Key points: Prestige Recruitment Specialists Limited are seeking to employ 3 experienced MIG Welder Fabricators to work near Dereham, for our well known and established clients. This position is FULL TIME. 40 hours (working) per week Important job duties will be to assist in the workshop, fabricating and welding fencing, animal shelters and barns for agricultural use. This position would be suitable for a person who has worked in a similar position previously, a person who can work independently and has exemplary conversational and communication skills both written and verbal. A formal qualification in MIG welding is desirable for this role but not called for if experience can be verified by references. Own transport will be expected due to the location of this production facility. This job will commence Monday 12th June and will be on going. Pay will be £10.00ph Weekdays beginning 12th June PAYE & Self-employed workers welcome. At Prestige we do not use umbrella companies and we do not change for dealing with CIS payments. If you have the right experience and would like to make an application for the role send an up to date CV, alternatively, call on (Apply online only) to discuss the role further. Your application will be given consideration and a shortlist of candidates will be submitted to our Client. If you have not heard from us within 7 days, you have been unsuccessful on this occasion, but we will keep your application on file for further suitable vacancies. Prestige Recruitment Specialists Limited is a well known independent recruitment organisationthat has been firmly established for 25 years within Yorkshire and Lincolnshire and now in NORFOLK. We specialise in providing trades and labour recruitment solutions into the Engineering & Construction Industry ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

25/07 - Carpenter jobs in Norfolk

Register so that employers can look for you. Many companies are now using CV banks and an effective way for you to proceed is to register your CV so they can find you.

04/07 * - Coded Welder    Location: Snetterton Norfolk Jobs

Key points: Our well established Norfolk based client specialises in the manufacture of pressure vessels, columns, reactors storage tanks and other similar products for the Food, Beverage, Pharmaceutical, Biotech, Cosmetic, Chemical, Petro-Chemical, Energy and Utility industries globalwide. The successful candidate will be a qualified welder fabricator coded in TIG and/or Flux mainfor Stainless Steel. Due to the nature of the work no two projects are ever the same so the employee will need to be confident in your abilities, highly adaptable and have the skillto read and interpret engineering drawings. the employee will be expected to carry out a weld and test and may be expected to produce copies of earlier weld certificates. Must haves • Coded Welder – TIG and/or Flux main– Stainless Steel • earlier welding fabricating experience • skillto read engineering/technical drawings • Self-starter able to think outside of the box and work on different projects Desirable • earlier work experience working with pressure vessels or similar The client is offering a competitive hourly rate depending on experience. To apply click “apply” below ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

Popular Searches on Amber:

Part Time Jobs in Norfolk  Sales Jobs in Norfolk  Shop Jobs in Norfolk  Accountancy Jobs in Norfolk 
Banking Jobs in Norfolk  Teaching Jobs in Norfolk  Construction Jobs in Norfolk  Nursing Jobs in Norfolk 
Cashier Jobs in Norfolk  IT Jobs in Norfolk  Telecomms Jobs in Norfolk  Software Engineer Jobs in Norfolk  Mechanical Engineering Jobs in Norfolk  Driving Jobs in Norfolk  Medical Jobs in Norfolk  Carpenter Jobs in Cambridge   |   Carpenter Jobs in Felixstowe   |   Carpenter Jobs in Ipswich   |   Carpenter Jobs in lowestoft   |   Carpenter Jobs in Norwich   |   Carpenter Jobs in Peterborough   |  

Carpenter jobs in the area of Norfolk

26/06 * - Welder/Plater    Location: Wymondham Norfolk Jobs

Key points: Highbury Recruitment quickly require 2 Welder/Platers for a busy engineering company who specialise in the fabrication of structural steel. Applicants will need to have the correct skills and experience as well as own transport due to location ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

   
10/07 * - Coded Welders, Pipe Fitters, Platers, Welder Fabs    Location: Norfolk Jobs

Key points: Fulcrum Engineering, are acting as an Employment Business on behalf of our Clients. We are proud to be an Equal Opportunities Employer. We are currently employing personnel for our Clients, covering their various locations in the Norfolk & Suffolk areas mainly, plus covering 50 mile radius and sometimes further afield if called for. Working mainly in the Fab Shops or on Sites in areas such as Norwich, Cantley, Gt Yarmouth, Bacton, Thetford, Kings Lynn, Wissington, Wisbech. Also as called for for other regions/areas such as Essex, Kent, London areas. JOB DETAILS Coded Pipe Welder - TIG, MMA, MIG FCAW Welding pipe work from 1 - 4 inch & 6 - 12 inch mainly. Using a variety of weld procedures such as TIG only on Carbon & Stainless TIG root, hot pass, fill and cap MMA MMA only MMA root, fill and cap MIG FCAW Welding to Coded Specs in Fabs Shops , Process Plants, Petrochem Plants, Power Stations. Ideally with current Weld Certs, or proof of codings etc. Plus other quals and safety cards/certs as below. Pipe Fitter Welder Working on industrial pipe work systems. Fabrication & installation of 1 to 2 inch & 3 to“ 12 inch pipe work Welding using TIG mainly to coded specs, on dairy & thin wall pipe work. Both screwed & fabricated systems. Plus fitting valves and pumps etc. Also working on vessels, tanks etc. Coded Pipe Welder - MMA, MIG FCAW Welding pipe work from 2 - 4 inch & 6 - 18 inch mainly. Using a variety of weld procedures such as MMA only MMA root, fill and cap MIG FCAW Welding to Coded Specs in Fabs Shops , Process Plants, Petrochem Plants, Power Stations. Ideally able to weld using TIG & MIG, MAG as well to good specs. Ideally with current Weld Certs, or proof of codings etc. Plus other quals and safety cards/certs as below. Pipe Fitter Fabricator Working on industrial pipe work systems. Fabrication & installation of 1 to 2 inch & 3 to 12 inch pipe work mainly. Setting up for Welder, who will be welding to coded specs, on dairy & thin wall, process and heavy wall pipe work. Also working on screwed & fabricated pipe work systems. Plus fitting valves and pumps etc. Also working on vessels, tanks etc. Plater/Pipe Fitter Fabricator Working from engineering drawing on the fabrication of plate & steel work, to high specs. Fabrication of tanks, vessels, pipe racks, pipe supports, pipe spools etc. Using saws, plasma, profilers, gas cutting equipment, grinders etc. Fabricating carbon & stainless plate, steel work, pipe work. Also working on fabrication & installation of industrial pipe work systems. Fabrication & installation of 2 to 4 inch & 6 to 18 inch pipe work mainly. Setting up for Welder, who will be welding to coded specs, on process and heavy wall pipe work. Plus fitting valves and pumps etc. Also working on vessels, tanks etc. hours (working) of Work ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

07/07 * - Welder    Location: Attleborough Norfolk Jobs

Key points: Working hours (working) – Weekdays 7.00am – 3.30pm, Capacity of role – Temporary to Permanent role Pay rate – £9.00 to £10.00 per hour Our expanding and highly regarded client based close to Attleborough is currently employing for MIG Welders to join them within a Temporary to Permanent capacity. Candidates will need own transport due to location although it is very close to the train station. the employee will be using MIG practises working on Mild Steel for this role ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

17/07 * - Tig /PipefitterWelder    Location: Diss Norfolk Jobs

Key points: Tig /Pipefitter-Welder - Diss - 3 month agreement- Competitive Rate An immediate agreementopportunity has arisen for experienced Tig /Pipefitter-Welder. My client who is a near by based is seeking a number qualified candidates to join the team, to help bring called for projects in on schedule Key Skill Requirements - Vast experience as a Tig /Pipefitter-Welder, - Able to read and work from drawings - Have worked and welded various metals - from Mild Steel, Stainless Steel, and Thin Sheet Metal. - Clean UK Drivers licence will be expected for the role In addition the role will involve site work therefore if you have Process Pipe fabrication experience, and have worked within the following industries Food, and Agricultural, this will be of particularly interested to the client. #BrilliantlyConnected ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

10/07 * - Fabricator Welder    Location: King's Lynn Norfolk Jobs

Key points: The prospective employer specialise in the design and manufacture of food dealing with machinery. They are currently seeking to employ a Fabricator Welder to join their expanding team based in Kings Lynn. The Fabricator Welder will be expected to Fabricate / Weld from engineering drawings in their workshop. The candidate - - Must have a positive approach to work. - Excellent attention to detail. - Be self motivated. - Must be able to read engineering drawings. - Must be able to work on own initiative and as part of a team. Salary is dependant upon experience. If you're an experience Fabricator Welder and are interested in this role then make an application today ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

23/06 * - TIG Welder    Location: Norwich Norfolk Jobs

Key points: A growing manufacturing company based in Norwich is currently seeking an experienced Welder to join their team. The ideal candidate will have earlier thin plate stainless steel experience and would have previously worked to high tolerances within sheet metal. Although this post is for an initial temporary period there is a good chance the role could move into something more permanent moving forward. hours (working) Monday – Thursday:- 08:00 - 16:30 Friday:- 08:00 - 15:30 Over time available, at time and a half, over 39 hours (working). Pay Rate £9.86 increasing to £10.86 following probation. For further details regarding this exciting opportunity send a copy of your CV today Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications we receive I’m afraid we are unable to respond to everyone individually nonetheless your details will stay on file should another suitable opportunity become available moving forward. If we can take your application further we will of course be in touch. Todd Hayes is acting as an Employment Business in relation to this vacancy. Todd Hayes Ltd ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

19/07 * - Welder Fabricator    Location: Diss Norfolk Jobs

Key points: A well-established expert engineering company based in Diss, Suffolk. The clients' main focus is the design, manufacture and installation of food conveyor systems and solutions. They are now seeking qualified welder fabricators to join their team. The successful candidate will be a qualified welder (TIG) fabricator with experience in welding – Stainless Steel, Mild Steel and Aluminium. Due to the nature of the work no two projects are ever the same so the employee will need to be confident in your abilities, highly adaptable and have the skillto read and interpret engineering drawings. The role will require you to use manual press brake operation and hand tools (grinders & drills) The ideal candidate will come from a structural steel work or mechanical handling and conveying background. Must haves • earlier welding fabricating experience • 5 or more years TIG welding experience • skillto read engineering/technical drawings • Self-starter able to think outside of the box and work on different projects Desirable • earlier work experience working within the food manufacturing industry The client is offering a competitive hourly rate depending on experience. To apply click “apply” below ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

 

Carpenter vacancies in Norfolk: Jobs above: 1-12 | Next of 31 Jobs found

Increase your job chances and Register now for all the future Carpenter Jobs in Norfolk 

- Takes 2 mins - New jobs by Email as soon as they are posted onto the internet - Let Employers find you!!!!

Disclaimer & Cookie Information

Jobs by location

Jobs by type

AmberJobs © 2011