Unix employers will often require a working knowledge of Solaris, Linux, Apache and SAN as well as an understanding of Shell programming. If you have experience with system management tools, logical file systems, and client servers then make sure this is clearly stated on your CV. The ability to communicate technical software, programming or hardware issues with non technical colleagues and clients will be a bonus, along with general Network experience.
Preferred technical skills will include knowledge of RMAN, TRU64, VMS, Oracle, Veritas NetBackup, IBM Tivoli and an understanding of Nagios. Jobs have been shown in the past for oracle programmer and java jobs in Bromwich php, sql and perl programming jobs in Dudley, xml, linux, sap and j2ee jobs in Walsall or unix administrator jobs in Solihull.
Similar careers and vacancies are dispalyed if no Unix jobs within Birmingham have been recently submitted. Recruitment agents and employers have posted Unix jobs or similar such as Programming, Java or Programmer jobs. These cover Bromwich, Walsall, Solihull or Dudley. Oracle jobs were recently advertised.
Areas of Birmingham include:
Acocks Green
Aston
Bartley Green
Billesley
Bordesley Green
Bournville
Brandwood
Edgbaston
Erdington
Hall Green
Handsworth Wood
Harborne
Hodge Hill
Kings Norton
Kingstanding
Ladywood
Longbridge
Lozells & East Handsworth
Moseley & Kings Heath
Nechells
Northfield
Oscott
Perry Barr
Quinton
Selly Oak
Shard End
Sheldon
Soho
South Yardley
Sparkbrook
Springfield
Stechford & Yardley North
Stockland Green
Sutton Four Oaks
Sutton New Hall
Sutton Trinity
Sutton Vesey
Tyburn
Washwood Heath
Weoley
Recently Birmingham's female population has been hit hardest by the difficult economic climate. For instance, in the Ladywood constituency 2,642 women, or just over 7% of the female population, do not have a job. The number of women claiming benefit in Ladywood has risen by nearly 25% during the last 12 months. Most of Birmingham has seen more than a 20% year-on-year increases in female unemployment. In February 2011 the unemployment rate in the West Midlands was 9.8%. The number of people unemployed had risen by 28,000 in the 3 months to December 2010. The West Midlands has the second highest unemployment rate of the UK.
You can send this page to a friend or perhaps your home computer so you can look again later? Your email is not seen or processed by us. When you click this link you will simply be forwarded to your own private email account on your computer. Details of a link to this page will appear.
Oracle-SQL Database Administrator Key Tasks & Accountabilities To provide Oracle RDBMS and Microsoft SQL support for existing test and production databases Bullet points: - To ensure that database expertise is available to help internal/external projects and the current production environments - To work with the DR and Change Manager to ensure that business continuity plans for databases are adequately tested and are made more successful ongoing. Working closely with the External IT Technical Architect and the Data Centre Hosting Manager to ensure that new business bids have optimum database design before they are committed to production - To be responsible for installation, setup and support of Oracle RDBMS and Microsoft SQL server technologies within the Data Centres and remote locations. To ensure that all Oracle/SQL databases have a tried and tested multi level recovery model so that data can be recovered in every circumstance.
Product Engineer (CNC Programmer) Within the employers Factory, based in West Bromwich Working within the Drawing Office, this position will involve the production of CNC programs for machine shop setting using Radan software and Amada TBZ software Bullet points: - Note: Training will be given for the TBZ software Salary: depending on experience - Further information for CNC Product Engineer (Programmer) job can be found by clicking the vacancy title.. Applicants should: Be an experienced Radan Programmer Ideally have previous work experience in a similar environment Be willing to undertake training Be able to work with minimum supervision and under their own initiative and motivation Have exemplary conversational and communication skills Be IT literate Sheet metal experience will be a definite advantage - Vacancy posted on 25 May. Candidates are advised to submit their CV if applying. .
As a CNC programmer your duties and responsibilities will include: Set up, program and operate the Mazak CNC lathe machines Bullet points: - Report any tooling deficiency or program adjustments to the manufacturing Manager for rectification - Supervise the operator to ensure they perform their job as successfully as possible. Obtain tooling as per the programme requirements - Instruct and train operators in production requirements. Ensure that the cycle times for new and existing components are at their optimum and make changes if necessary.
COMPANY PROFILE We are a high precision sub contract engineering company working in the Aerospace, Oil & Gas and Formula 1 industries Bullet points: - Salary £13.12 to £15.12 per hour. . - Further information for CNC Miller Turner, Programmer, Setter job can be found by clicking the vacancy title.. ROLE RESPONSIBILITIES * Programming, setting and operating Lathes or Mills * Working mainly on one-off's & Small batch work * Self-inspecting PERSON SPECIFICATION * Must be able to program using Mazatrol OR Fanuc OR Hurco controls for Lathes or Mills * MUST come from a sub-contract environment * Experience of working with exotic and semi-exotic materials would be advangeous * Experience of working with one-offs would also be beneficial WE SPECIALISE IN PERMANENT CNC RECRUITMENT THROUGHOUT THE UK AND - Vacancy posted on 14 May. Submitted 8 am. 14/05 from recruitment agency. .
CNC PROGRAMMER / SETTER / OPERATOR Location: Kitts Green, Garretts Green, Sheldon, Solihull, Birmingham, West Midlands Rate: TBC Duration: Flexible, Temp, Perm or Temp - Perm The Company: The company is one of the global's largest and most diversified producers of specialty metals Bullet points: - Our 8, 900 talented people use innovative technologies and systems to offer growing global markets a wide range of specialty metals - Minimum Requirements Good standard of written and verbal English, Experience of CNC lathe programme / setting / operating, Experience of inspection equipment including vernier and micrometres, Experience of despatch / goods receipt an advantage but not required, Current fork lift truck licence, counterbalance, reach , four way (can be trained if necessary), Experience of working with metals is. They operate production facilities, service centres and sales offices throughout the United States and in 16 other countries - They are a market leader in: Titanium and Titanium Alloys Nickel-based Alloys and Superalloys Stainless and Specialty Alloys Zirconium, Hafnium and Niobium Tungsten Materials Grain-oriented Silicon Electrical Products Forgings and Castings Job Summary We have a requirement for a CNC programmer / setter / operator, operating our Mazak controlled CNC Vertical Tooling centre, in our speciality metals cell, in the medical / aerospace / motorsport industry. Primary Duties Goods receipt duties including the paperwork, Programming the milling machine as required, Operating of the lathes / millers, working to production control cards, Setting of lathes / millers when necessary, Inspection of the finished product using vernier / micrometres Ra etc, Despatch of the product including paperwork, General housekeeping and safe working practices.
ALT1283 – CNC Setter Programmer – South Birmingham Our South Birmingham client is looking to appoint a CNC Setter Programmer to join their engineering team working on a number of sub-contract projects Bullet points: - Sliding head experience preferred the employee will be working a 3 shift pattern THE OFFER 9 to £9.50per hour 20% for night shift - Further information for CNC Setter Programmer - South Birmingham job can be found by clicking the vacancy title.. THE PERSON the employee will be an experienced CNC Setter Programmer, having used a range of CNC machines including Milturn with Fanuc control, the employee will be an accomplished bar feed operator - Vacancy posted on 03 May. Submitted 8 am. 03/05 from recruitment agency. .
CNC Programmer / Setter Birmingham Permanent – Hourly paid, £12.00 per hour My Client is currently seeking a fully capable and appropriately qualified CNC Programmer/Setter who ideally has a broad background and can demonstrate the ability to programme using various controls including Fanuc and Heidenhain, on CNC machines with live tooling, working with a variety of materials including carbon steels, stainless steels and brass Bullet points: - Vacancy responsibilities 1 - Be able to interpret engineering drawings to find out the minimum number of cuts, selection of cutting tools, machine speed & feed rates to achieve the best possible cycle time and efficiency Further information for CNC Programmer Setter job can be found by clicking the vacancy title.. To set up, program and maintain all CNC turning machines within the machine shop - Set up, program and operate the CNC lathe machines Vacancy posted on 03 May. Obtain tooling as per the programme requirements.
£12 - £13/hour company pension scheme & lots of OT
JOB POSITION Job Title: C.N.C Bullet points: - Operate and control various C.N.C - Operate all equipment correctly and safely, following all working procedures. PROGRAMMER/SETTER/OPERATOR/ VMC on a cincinnati with Fanuc controls Department: MACHINE SHOP JOB PURPOSE Work in machine shop producing components and products for customers and production - Program C.N.C. Program C.N.C Submitted 8 am. 01/05 from recruitment agency. .
We are employing for a CNC Programmer as a Turner Bullet points: - We are employing for a night shift - Further information for CNC Programmer job can be found by clicking the vacancy title.. The Candidate must be a confident Programmer with experience using Fanuc controls - They are constantly investing in the latest technology to keep up with the demand, they work with a wide range of materials. Immediate starts available .
Analyst Programmer required for an exciting opportunity in the centre of Birmingham Bullet points: - The need has arisen for a highly qualified programmer with an analytical experience to come on board at this crucial time - Alternatively to request more details send me and email at: Thanks for your interest . My client, a fast growing mobile and web development company are looking to vastly increase their current workforce due to a sustained period of growth - As an analytical programmer the employee will have at least four years' experience with design and development of two of the following skills: *Drupal/PHP coding *ASP.NET/C#.NET *PL/SQL *JavaScript The Candidate may need to take lead of projects and be able to communicate successfully to technical and non-technical members of your team. This client is a company with 250+ employees with offices in the UK USA and ASIA.
11
/
Quality Inspector CMM Programmer
Birmingham Jobs
£24000 - £28000/annum
The prospective employer, one of the Midlands foremost experts in the design and manufacture of precision machine tools and associated work station fixtures * Please send your CV for the attention of Peter Bhakta * General machining operations, particularly where exacting tolerances are called for in small batch production and the manufacture of precision components They are looking to appoint a CMM Programmer/Quality Inspector based near central Birmingham * The company has a flair in utilising traditional skills in conjunction with the latest in machine development, the company's principle product range includes special purpose machines, jigs, fixture, press tools, moulds and gauges for application across a wide spectrum of engineering requirements * Candidates for Quality Inspector CMM Programmer job can proceed by clicking the job title.
12
/
CNC Programmer
Walsall Birmingham Jobs
£500 - £600/week
The prospective employer is a leading engineering and machining company in the West Midlands * The role is predominately on days paying £500 - £600 per week * Candidates should be able to set/operate and programme CNC Turning Machines * They are now looking to recruit a Skilled Machinist to join their successful machining department * To apply for the exciting opportunity apply send your CV in MS Word Format N.B. All jobs shown are recent and in the location of Birmingham.
13
/
CMM Programmer
Birmingham Jobs
£25 - £26/hour
You'll demonstrate full CMM Programming experience with either of the following software; PC DMIS or Mitutoyo * To Apply: Please forward your most up-to-date CV or by calling Matthew Buchanan on (Apply online only) * The ability to use CAD data on the CMM would be desirable for this role * You'll also be able to show the validation of CMM programs through data analysis and correlation * View our latest jobs today at (url removed) and follow us on Facebook, Twitter & LinkedIn JAM Recruitment is acting as an employment business with regards to this position
14
/
CNC Programmer
Milling Turning
Birmingham Jobs
£28000 - £40000/annum
Encore are representing a client in Birmingham who require a CNC PROGRAMMER with experience of Milling and Turning * Encore offer a "refer a friend" reward scheme where you could receive a gift of up to £500 * Specialist Recruiters in the Technical/engineering, and senior appointment sectors * The Candidate must have experience of 1 or more of the following : FANUC HEIDENHAIN MAZATROL SIEMENS Please send your CV for further information regards to the client and role CNC PROGRAMMER- BIRMINGHAMEncore Personnel are an Equal Opportunities Employer * To find out more about CNC Programmer - Milling Turning job (posted /) click for further info.
15
/
CNC Programmer
Mazac Star Citizen Controls
Birmingham West Midlands Jobs
Our Client, a manufacturer of precision turned parts, are currently looking for a CNC Programmer to join their team * There are also shift allowance bonuses too for those that work nights * The hours of work ideally would be nights but the Client is happy to have a time served candidate work days but with an element of overtime on top of the standard working hours * The Candidate must have experience with Mazac/Star/Citizen controls, this is required * If you are looking for work and tick all of the above criteria call Guy or Tim on (Apply online only) or send your CV immediately
16
/
CNC Programmer
Birmingham Jobs
£28 - £32000/annum
CNC Programmer Birmingham £15ph Days Shift We are currently seeking an experienced CNC programmer for a client who is a 1st tier supplier of precision parts into the automotive sector * Professional Technical is acting as an Employment Agency in relation to this vacancy * The right candidate will need to be fully experienced and hard working, self motivated and be able to manage their workload without constant supervision in order to meet tight deadlines * The successful be responsible for programming/setting of work from creation of fixtures through to 1st off inspections * Professional Technical supply the talent so that our clients can focus on creating and engineering that continue to push the boundaries within British manufacturing
