Amber Jobs Home - Yorkshire & Humberside - Job search in Yorkshire for jobs. - Help . Advertise . Contact . Disclaimer

Share This Page on Facebook

Typical Job ad below for Yorkshire or nearby locations (shown as example for job requirements and responsibilities):

-----------------

Example vacancy only:
Principal Structural Engineer

Consulting Engineers based in York area require a Principal level Structural Engineer to join them on a permanent basis.
In this role the employee will report directly to the Technical Director and have responsibility for a small team of Engineers and Technicians.
Please note this job for Principal Structural Engineer was advertised some time ago and is now withdrawn.
1. Candidates for this role should be Chartered Engineers with good consultancy general building structures design and project management experience.
2. Salary package negotiable. Many opportunities within the organisation. 0000 Speciality:
Structural.
(N.B. Principal Structural Engineer is shown for research purposes only.)
the employee will ideally also have some experience of rail structures , but this was not an required requirement
Find Leeds or York as well as Yorkshire jobs on the right.

Find further advice or information for job hunting Principal Structural Engineer type jobs at:
Engineering training   

-----------------

Email this page to a friend

You can send this page to a friend or perhaps your home computer so you can look again later?
Your email is not seen or processed by us. When you click this link you will simply be forwarded to your own private email account on your computer. Details of a link to this page will appear.

It is 100% safe!

Yorkshire jobs


As well as jobs in Yorkshire find on Amber Jobs a range of vacancies such as jobs in Hull, jobs in Doncaster and Jobs in York. Also vacancies in Grimsby.

Increase your job chances and Register now for possible future

Engineering Jobs in Yorkshire

 

- Takes 2 mins - New jobs by Email as soon as they are posted onto the internet - Let Employers find you!!!!


Jobs updated:

 

Over 100,000 jobs nationwide

Also try....: Part Time Engineering Jobs in Yorkshire * Did you mean....: Engineering Jobs in West Midlands | Engineering Jobs in East Midlands

Engineering jobs or similar/near:
Yorkshire
Updated: 21/09/17


15/09 - Engineering Team Member    Location: North Halifax West Yorkshire Calderdale ... Jobs

Key points: We are seeking to employ and looking for an Engineering Team Member to be working with our prestigious, Halifax based client on a permanent basis. Overview Following all Health & Safety procedures at all times. To give a pro-active approach to the prevention of equipment failure and ensuring the schedule PMs are complete as planned. Support the production and engineering functions with machine care, breakdown & repair projects and development as required. Ensure Quality, Waste and Efficiency targets are met by working as an integral part of the manufacturing team. Key responsibilities 1. Carry out work assignments issued by Lead Engineer and maximise successfulness of the shift at all times by ensuring efficient completion of tasks. 2. Compliance with Company policies, procedures and regulations (e.g. attendance, quality, safety, GMP) and ensure these are followed to the required standard. 3. Support the development and implementation of balanced PPM schedules across the network. 4. Supports the Engineering Planning Process and deputises for the Engineering Planner 5. Demonstrate a team approach with regard to maintenance and hygiene of equipment and support operators and operations team. 6. Follow all work instructions and procedures at all times. 7. Ensure that all Work Orders and PPMs issued to the shift are completed and signed off in CMMS. 8. Work with other functions as part of the manufacturing team to make sure efficient running of assets and carry out prioritised work as agreed. 9. Compliance with Company policies, procedures and regulations (e.g. attendance, quality, safety, GMP) and ensure these are followed to the required standard. 10. Resolve mechanical and/or electrical problems in a timely fashion. 11. findand examineproblems before crises and determine appropriate action and follow-up. 12. Apply structured problem techniques to help findthe root cause of asset failures. 13. Ensure all parts removed from stores is following stock movement process, replenishment orders are complete without fail. 14. give the Lead Engineer with information on all engineering downtime attended on shift, related quality issue, work orders completed PMs completed and other details as required. 15. Supports CAPEX projects from the implementation and design phase through to execution & completion. 16. Deputise for Engineering Team Leaders and takes responsibility for the engineering team on shift. 17. Supervise contractors attending site and ensure the correct Contractor Control documentation is completed and issued. 18. Complete Permit to Work system when appropriate. Person Specification Qualifications GCSE or equivalent. (A to C qualifications. Maths & English required) ONC/HNC or equivalent. Possess 17th Edition Certification (electricians) Experience Electrical and/or mechanical qualifications / time served apprenticeship. 3 Years practical knowledge of working in an automated production environment. A good s ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

Graduate Engineering (Mechanical, ImechE)

Location: Wakefield West Yorkshire Jobs

Key points: Graduate Engineering (Mechanical, ImechE) Wakefield, West Yorkshire £21, 000 + Company benefits + salary review every six months. As a candidate, are you a Mechanical Graduate Engineer with a master's degree looking for a clear route of progression and a structured mentor program to reach Chartered status within 4 years? If you have a master's degree in Engineering and are looking to work within the number one engineering company in the UK specialising in the Petrochemical and power generation projects, this will provide you with an incredible beginning point for your career. This is a one off, special opening that will provide a graduate with the discipline of site work in various projects in the first year, opening up doors across the organisations into Design Services, Metallurgy, and important maintenance projects across the UK the employee will have the opportunity to work on various power station and petrochemical sites. Here is a sensational opportunity to join a globe business, based in Wakefield, which offers technical work in a company that will support globe travel, training and career progression. The role:
* 1st year working on site to gain a fundamental understanding of maintenance work across petrochemical and power generation sites.
* 2nd year exposure to placements across the company - Design, Metallurgy, Maintenance.
* Structured 4 years to become a Chartered Engineer, The person:
* Masters (MSc) in Mechanical Engineering discipline looking to become a Chartered Engineer within 4 years,
* Looking to work across a multi-disciplined company. Wakefield, West Yorkshire, Graduate, technical, engineer, mechanical, materials, metallurgy, chemical, imeche, chartered, repair, maintenance, petrochemical, plant, power, oil, gas, design, services, thermal, installation. Please send all CV's and applications or alternatively call (Apply online only) If you are interested in this position, and have the relevant experience then send your CV . Visit our website at (url removed) ..........

14/09 - Engineering Manager Core Tribe    Location: North West Yorkshire Sheffield Yorkshire ... Jobs

Key points: At Sky Betting & Gaming we don't have team Teams we have Tribes. Each Tribe is made up of small, agile and autonomous squads who work collaboratively with a shared purpose. So whether you join our Bet Tribe, Early Careers Tribe or anything in between you will work with a group of people with raw energy, natural talent and the kind of spirit that helps us think big, act bold and change the game. It all means that we've created the kind of workplace that wins awards such as a place on the prestigious list of Sunday Times 100 Best Companies to Work For. An Engineering Manager is responsible for a group of up to 20-30 software engineers of various experience levels and will usually have up to 7 direct reports consisting of Principal Engineers (technical leaders) and Lead Engineers (technical people managers). The role reports into a Head of Engineering alongside other Engineering Managers, Test Managers and Design/UX Managers. The role is broadly responsible for both people management for this team and the "how" we deliver against our business goals from an in-house software engineering perspective. The Candidate must be a confident technical leader with experience in an evolving and enterprising web-scale environment under an agile DevOps ethos where operational performance is a significant part of engineering best practice. Engineering People Management. Recruit a strong team of top-notch highly motivated software engineers at all levels, manage skills gaps and reduce key man dependencies.Develop & motivate those in your team by providing clear direction opportunities for learning & direct coaching. Pro-actively manage any individual performance problems.Define and keepthe best team structures (aligned to a culture of "small autonomous agile teams") to match the current focus of our business. Create An Sustainable & Scalable Engineering Delivery Pipeline. Evangelise & prioritise engineering best practice (the "how" of achieving the particular business goal) across all squads so we have a clear direction for improvement.Specific examples are that this role is responsible for managing the levels of technical debt, common coding practices, aging code risks, framework & language choice, development build and deployment tooling.Be responsible for engineering SDLC adherence against our wider compliance requirements. Make sure we do this in a way that maintains our low-bureaucracy high-trust working environment.Ensure that technical expertise in incident management, root cause analysis, post incident decisions and technical oversight of remedial work is carried out. Champion Quality and Continuous Improvement. Work with Design Leads, Test Managers and other stakeholders to make sure we deliver high quality engineering solutions with the right balance between delivery speed vs operational risk.Constantly make our engineering better: the skills and expertise of the team, improving ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

13/09 - Civil Engineering Manager Civils    Location: North West Yorkshire Yorkshire ... Jobs

Key points: Brief Outline:Civil Engineering Manager - Civils - £45k - Yorkshire. Due to significant growth, they have a motivating and challenging job opportunity for a talented and knowledgable Civil Engineering Manager to be working with the team. Assisting with the delivery of a key water frameworks across the region. About the Client:an established and leading civil engineering and construction company mainly operating within the water industry but also operate in building and civils markets and have a turnover of over £169 million.About this new vacancy offer : A key aspect of the vacancy is to help the company's approach to temporary works by co-ordinating temporary works training, upon completion of training appointing colleagues to the vacancy of temporary works co-ordinator and working with operational colleagues to meet the required standard. The role will also include providing expert support to operational teams, conducting steady audits to highlight areas for improvement or best practice. In addition to the Temporary Works the Engineering Manager will also work with a wide range of internal stakeholders to progress a broad range of strategic engineering initiatives covering sustainable construction BIM and standard products (off-site build) as well as supporting the internal graduate development programmes. The Engineering Manager represents the Company externally, attending and contributing to industry forums and similar bodies. This role reports directly to a Board DirectorAbout the Candidate: The role would suit a professionally qualified engineer (preferably CEng), or someone approaching this level in their career Ideally experience working in both a design and construction environment. Ideally the jobseeker for this new vacancy should have a background within the civil engineering industry, although others such as building or mechanical/electrical may be considered. Relevant Experience and QualificationsPoints of Appeal: Leading civil engineering and construction company Rapidly growing company Professional but fun workplace, where people have a voice. Opportunity for growth Training (over £1Million spent on training last year)Contact Information:If you are interested in the above vacancy or wish to discuss any other opportunities Contact Humres Recruitment. We often have knowledge of passive vacancies that companies are not advertising but would like to see gifted individuals for. Feel free to contact us to discuss. ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

21/09 - Engineering jobs in Yorkshire

Register so that employers can look for you. Many companies are now using CV banks and an effective way for you to proceed is to register your CV so they can find you.

05/09 - Engineering Plater Required    Location: North West Yorkshire Sheffield ... Jobs

Key points: The prospective employer located in the Sheffield city centre URGENTLY require 2 Engineering Plater/Welders for Temp to Perm positionsIdeally the employee will be a time served or have at least 2 years Plating experience working in a fast paced Engineering environment.Immediate starts for the right jobseekers with excellent career opportunitiesUpto £13 per hour dependant on experienceTime and Third after 39 hoursSaturday Time and a Half Hours of work are Monday to Thursday 7am-3.30pmFridays...... 7am-1pmSaturdays 6am-Midday Applications by CV only to Paul Balderson atpaul.balderson@search.co.ukSearch is an equal opportunities recruiter and we welcome applications from all suitably qualified or qualified jobseekers, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age. ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

***************************

Increase your job chances and Register now for all the future Engineering Jobs in Yorkshire 

- Takes 2 mins - New jobs by Email as soon as they are posted onto the internet - Let Employers find you!!!!

***************************

Popular Searches on Amber:



Engineering Jobs in Bradford   |   Engineering Jobs in Doncaster   |   Engineering Jobs in Grimsby   |   Engineering Jobs in Halifax   |   Engineering Jobs in Harrogate   |   Engineering Jobs in Huddersfield   |   Engineering Jobs in Hull   |   Engineering Jobs in Knaresborough   |   Engineering Jobs in Scarborough   |   Engineering Jobs in Sheffield   |   Engineering Jobs in Leeds   |   Engineering Jobs in Whitby   |   Engineering Jobs in Grimsby   |   Engineering Jobs in Scunthorpe   |   Engineering Jobs in Castleford   |   Engineering Jobs in Goole   |   Engineering Jobs in Rotherham   |   Engineering Jobs in Barnsley   |   Engineering Jobs in York   |  

Engineering jobs in the area of Yorkshire

14/09 * - Production / Manufacturing Engineering Manager (Light Engineering) ...    Location: Leeds West Yorkshire Jobs

Key points: We are employing exclusively for an experienced Manufacturing / Production Engineering Manager to work for a Light Engineering company situated in Leeds, West Yorkshire. THE ROLE:
* the employee will report directly to the company Managing Director and will be responsible for process improvements and projects associated with the individual manufacturing cells.
* Play an integral part in reducing waste and increasing productivity by using modern manufacturing and process improvement techniques.
* Support all manufacturing processes, cells and equipment to manufacture the company's mainproducts.
* Develop production processes along with identifying solutions to problems; this will/may include liaising with suppliers.
* Develop, identify, recommend and manage engineering solutions / projects to deliver improvements in line with the company's objectives for operational improvements, including actively investigating problems affecting production and being proactive in dealing with them in a systematic and methodical manner. Important job duties :
* Establish and Introduce improvements in the manufacture of parts, techniques and processes to:
* Deliver quality engineering solutions in learned response to development, manufacturing and operational needs
* Reduce setup and tool change time.
* Reduction in rework and scrap.
* Increase output.
* Improve delivery of finished product to customer.
* Ensure adherence to quality of finished product.
* Manage engineering changes to parts, production and materials in an successful and efficient manner.
* Develop operating instructions and equipment specifications for all production activities/processes.
* Implement cost reduction initiatives while maintaining high quality standards.
* keepthe routing's on the company database. called for SKILLS & EXPERIENCE: The Candidate must have:
* The skillto respond quickly and to work under reasonable pressure encompassed with a pro-active work ethic in the reduction of downtime.
* A solid background in engineering and manufacturing along with the qualifications in these fields.
* Good understanding of company goals and KPI's.
* An skillto communicate successfully at all levels and be a team player.
* Knowledge of Lean principles and practices.
* An skillto embrace change.
* Excellent knowledge of Health & Safety awareness and policies.
* Good all round knowledge of 5s standards. THE PACKAGE: the employee will be paid a basic salary of between £40, 000 to £45, 000 per year (depending on experience), plus exceptional benefits ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

   
08/09 - Semi Skilled Engineering Assistant    Location: Yorkshire Calderdale North Halifax West Yorkshire ... Jobs

Key points: SEMI SKILLED ENGINEERING ASSISTANTBased: HalifaxPermanent position (will carry out a 12 week probationary period through Major Recruitment)£10ph to £13ph depending on experienceMonday - Thursday 8.00am - 4.30pm and Friday 8.00am - 3.30pmThe prospective employer requires a semi qualified engineer to help their qualified engineers on the shop floor.Duties will include the operation of both CNC lathes and CNC milling centres , operation of automatic saw , stock control of materials and finished components , packing of completed components for despatch together with general cleaning of the machining centres and the shop floor.Some driving duties including delivery to customers and suppliers , collection of materials and tooling will also be expected so a full UK driving licence is also required.This is a PERMANENT position with development opportunities for suitable jobseekers.HOURS - 39 hours per week ( overtime currently available ) .Monday - Thursday 8.00am - 4.30pm and Friday 8.00am - 3.30pmPAY RATE - negotiable dependant on experienceHOLIDAYS - 28 days per year including 8 statutory days.This job was initially submitted as www.totaljobs.com/job/75898125 ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

Test Engineering Manager

Location: Doncaster South Yorkshire Jobs

Key points: PURPOSE: • Responsible for leading the test development team; • In addition to leading the test development group, will be responsible for participating in day to day test development activities and support of production test issues when required; • Accountable for forecasting expected test development revenue and meeting agreed upon financial targets; • Responsible for day to day results, analysis, trends and traceability PRINCIPLE ACCOUNTABILITIES/DUTIES: • Lead the Test Development group, to include leading test development activities, managing projects, forecasting revenue and growth, mentoring and coaching personnel, and taking on responsibilities as an individual contributor; • Development of functional test systems; • Spec equipment, work with the Purchasing department to source equipment, and assist the test engineers with installation; • Work directly with the R&D group to provide DFT/DFM analysis and test specifications; • Create Test system documentation including but not limited to: Equipment operating procedures, Test procedures, preventative maintenance schedules, recommended spare parts lists, calibration instructions, schematics, BOMs, and wiring diagrams. • Deal with yield issues when needed, this will require interfacing directly with the factory / R&D; • Identify and implement quality improvement initiatives; • Write test software to automate the test systems, communicate to the device under test, and store/retrieve results from the database. • Provide technical direction and assistance to other support personnel. • Keep abreast of latest test technologies and methods • Cost reduction activities. • Scope wide variety of manufacturing related projects and ensure completion within targeted guidelines. • Ensure all H&S requirements are adhered to. REQUIRED (MUST HAVE) QUALIFICATIONS: • Educated to minimum Engineering Degree (experience in functional test development) preferred. • Be able to specify required test equipment • Writing software to automate test and measurement; • Qualifying test systems; • Creating documentation to duplicate systems, provide user guides, and PM schedules • Experience with managing a team of engineers and technicians • Hands-on experience designing custom circuits to interface automated test equipment with devices under test; • Possess excellent verbal/written communication, interpersonal and customer-oriented skills; • Production setup and Test flow recommendation experience; • Proficient with LabVIEW, TestStand, C, C++, and/or C# (visual basic and visual basic.NET experience will be considered) • National Instruments and Agilent test equipment knowledge; • Electrical Lab Equipment and measurement instrumentation (oscilloscopes, DMM, PS, spectrum analysers, RF signal generators, power meters)  ..........

17/09 - Civil Engineering Technician Sheffield    Location: Sheffield North West Yorkshire ... Jobs

Key points: As a jobseeker are you a Civil Engineering Technician located in or close to Sheffield?Can you demonstrate earlier work experience undertaking technical design for Civil Engineering & Drainage projects within a UK Engineering practice?Have you a minimum of 2 years experience using AutoCAD, Civils 3D AND hold a HND/HNC in Civil Engineering?I'm employing for a National Engineering Consultancy who is looking to employ a Civil Engineering Technician in their Sheffield offices.As a Civil Engineering Technician The Candidate will need to have working knowledge and experience working on Infrastructure, Earthworks, Ground Modelling & Drainage design for residential and commercial projects. Utilising your software understanding in AutoCad Civils 3D, Microdrainage & MapInfo you will join the existing Civils team in Sheffield to assist in the delivery of projects across the UK.The Candidate will need to show your experience and understanding of working on s38, s278, s104 & s106 applications, production of engineering calculations, formal reports, sewers for adoption and a clear understanding of the residential market.The role will offer the successful applicant an excellent platform for career progression and the opportunity to work on a range of projects across the Engineering sector.To be considered for the vacancy deliver your curriculum vitae (CV) to lee.rimell@penguinrecruitment.co.uk or alternatively call Lee Rimell on 01792 365008 to discuss this role or further Civil Engineering, Highways or Infrastructure opportunities in greater detail. ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

15/09 * - Quantity Surveyor Civil Engineering    Location: West Yorkshire Jobs

Key points: A long standing client of mine has just secured a large project just north of Leeds. They are seeking to employ an experienced intermediate level Quantity Surveyor to join their team. My client has been established for a number of years and their Northern office is turning over £50m+ after being open only for a relatively short time. This is testament to the quality of their work and the strong relationships they have managed to build in this time. Typically projects range from £1m- £50m and the employer is well known for their expertise in bulk earthworks, heavy civils works and reinforced concrete works. Ideally candidates for this job vacancy offer will have expereience with a similar contractor. the employee will also need at least 3-5 years post graduation experience. I am seeking to employ someone who is commercially switched on rather than technically strong- nous is a key skillset that the employer is craving at this time. the employee will have experience of ICE and NEC contracts and be proficient in using them to create positive financial outcomes. On offer is a good salary and package along with a company car, travel and subsistence allowance and a bonus scheme which can pay out anywhere between 10 and 25% of salary- this is dependent on personal and company performance. In my experience with this contractor I can say that they are friendly, level headed and straightofrward people. the employee will be given clear objectives and be rewarded well for your efforts. All in all a decent company to work for. Please apply without delay as I am sure this will prove to be a popular opportunity. All applications are treated in the strictest confidence ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

13/09 - Shift Engineering Supervisor    Location: North West Yorkshire Yorkshire Barnsley ... Jobs

Key points: Shift Engineering Supervisor Barnsley Shifts Competitive rates of pay + overtime TM Resourcing (Technical & Engineering Division) are currently employing for a talented and knowledgable Engineering Supervisor to work for our well established food manufacturing client. This is an exclusive opportunity for the right jobseeker The prospective employer has a low turnover of staff making this type of vacancy very rare and sought after. The Engineering Supervisor will work alongside the shift engineers and co-coordinate the immediate and longer term requirements of the production facility, Ensure the team adhere to food safety and health & safety legislation and company's policies and procedures whilst reducing breakdown response time. Job Duties (List not exhaustive).Liaise with the Engineering Manager and as required operations managers and management personnel to prioritise both reactive and planned maintenance to make sure that service levels are maintained. To promote and ensure a right first time approach and lead by example by means of enthusiasm and craftsmanship to inspire others in the Engineering shift team. Ensure that all work carried out is done so to the expected professional standard Ensure all breakdowns are logged in the required detail and any persistent problems / underlying causes are identified. findskills gaps within the department and tell the Engineering Manager and give support to solve those gaps. Take ownership for the days/nights handover and ensure that a formal and full shift handover is performed at every shift change. Manage and checkEngineering rest periods, ensuring adequate cover within the production facility at all times. Conduct RTW interviews for sickness and holiday absence & accident investigations in a timely manner. Conduct weekly toolbox checks of the engineering team and ensure the inventory is correct and to a professional standard expected and take appropriate actions to correct. findways for continuous improvement and assist in the implementation. Ensure that shift engineers complete the PPM schedule and any issues are relayed to the Engineering Manager and take ownership in closing out on time and in full. To promote, order high standards and professional discipline within the Engineering teams and carry out first line disciplinary procedures if required. successfully manage shift manning levels at all times and to make sure that minimum resource requirements are met and reported at all times so that there is no impact on service to manufacturing operations. The ideal jobseeker for this new vacancy with have experience with in food manufacturing, Supervisory / team leader experience and be a time served / apprentice taught and trained Engineer. Shift pattern: 4on / 4 off 12 hours (2 days / 2 nights, 4 off) For the full job brief or to make an application Contact Laura Thompson ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

Maintenance Engineering Manager

Location: Barnsley South Yorkshire Jobs

Key points: An internationally recognised market leader, our client is a major food manufacturer, producing a distinctive range of branded short shelf life products. They work through innovation and investment, both in their production facilities and people. Quality is a fundamental issue. Their products undoubtedly compliment their production methods, and as such, their product range is second to none A principal supplier to all the major supermarket chains, wholesalers and independents, they are currently experiencing sustained expansion and business growth. The North is at the very heart of their Food Business Unit; their prestigious manufacturing facilities have undergone significant change and expansion, and in order to remain at the forefront of a highly competitive and fast moving market, they have created a higher-ranking role for a Maintenance Manager. This role will lead all maintenance activities on site, accountable for ensuring the efficient production of a variety of branded food consumable products. Role A demanding and stimulating role, the employee will devise and ensure a robust and responsive maintenance strategy, and develop contingencies which permit the whole sites working regime to be supported fully by all areas of engineering. the employee will create, implement and manage both maintenance and capital expenditure budgets for the factory, utilising various operational methodologies such as supplier optimisation, minimal inventories, and asset management techniques. the employee will ensure that standards and procedures are in place and steadyly update to govern all engineering activities on site, including all aspects of asset registration, safe working practices, management of contractors and the assessment of competence of all engineering staff. Demonstrating experience within an FMCG environment. the employee will ideally be educated to Degree level, preferably in a Mechanical Engineering / Chemical Engineering discipline, and a proven track record in the delivery of significant project engineering tasks. the employee will have finely developed interpersonal and communication skills and the natural ability to motivate and lead large teams. A proven track record of meeting agreed performance targets, and financial reporting skills are also crucial to the success of this role. the employee will also have the ability to highlight improvement opportunities and monitor individual and team performance. the employee will display successful organisational skills and demonstrate a forward thinking, career aspiring and enthusiastic approach. In terms of your team management skills, the employee will also possess a strong ability in forming positive working relationships across all levels ..........

Associate Director of Structural Engineering (North) ...

Location: Castleford West Yorkshire Jobs

Key points: The Company: My client is an expert consultancy within Structural Engineering, Civil Engineering, Highways Structures, Geotechnical and Environmental engineering, and Contaminated Land working with both Public and Private sector clients within the Construction industry. Working throughout the United Kingdom they have gained a large client base which in turn has led to a growth in the business and driven the need for an Associate Director of Structural Engineering (North) division who will be reporting to the Director of Structural Engineering. As the employer is part of a larger organisation you would be expected to work closely with the Managing Directors and Structural Engineering staff in the Northern region. Main Tasks & Vacancy responsibilities: The key responsibilities of this role will include, but not be limited to:
* Visiting steadyly all Group offices in the Northern Region to build relationships with Regional/Managing/Practice Directors, Structural Engineering staff and currently trading business clients.
* Professional Line Management of Structural Engineering staff in the Northern Region.
* Resource Management of the Structural Engineering workload in the Northern Region.
* Implementation of best practice in Structural Engineering across the Northern Region.
* Delivery of commercial targets in Structural Engineering across the Northern Region.
* Liaising with Directors and other Associate Directors to share workload and resources as required.
* Visiting other Group offices when required.
* Leading projects where appropriate.
* To ensure the implementation and compliance of all Group policies, procedures and guidelines.
* To lead on the delivery of quality assured, client focused products and services to meet the agreed requirements of the customer.
* To contribute to the operation and development of the Business Management System to ensure the continuous improvement of quality assured services/products for clients.
* To carry out other duties appropriate to the level and character of the post required Skills & Qualifications required for this post:
* Leading projects in the Private and Public sectors
* Managing a team of professional staff
* Developing relationships with clients in the Public and Private sectors
* Commercial responsibility for an area of business
* Design of Bridges and highways Structures (DMRB)
* Must have experience in dealing with clients at establishment head level
* Experience in working to agreed targets within a commercial environment
* Chartered Engineer (CEng)
* Member of the Institution of Structural Engineers (MIStructE)
* Ability to lead designs in all common forms of construction (steel, concrete, timber, masonry)
* Ability to use competently the main structural codes of practice and building regulations
* Ability to use Structural Eurocodes
* Must be able to travel. Frequently ..........

30/08 * - Civil Engineering Technical Manager andndash; Leeds andndash; Salary Negotiable ...    Location: North Yorkshire Jobs

Key points: Civil Engineering Technical Manager – Leeds – Salary Negotiable My client here is looking to increase their engineering capabilities by appointing an Engineering Manager to cover the Northern operational area of the business, working alongside a counterpart covering the South. This role will report directly in to a Board Director. A key aspect of the role is to help the approach to temporary works by co-ordinating training, appointing colleagues to the role of temporary works co-ordinator and working with operational colleagues to ensure called for standards are met. The role will also include providing expert support to operational teams, conducting steady audits to highlight areas for improvement or best practice. In addition to these duties the employee will also work with internal stakeholders on a range of engineering initiatives covering sustainable construction, BIM and standard products as well as supporting internal graduate programmes. the employee will represent the company externally, attending and contributing to industry forums and similar bodies. The ideal candidate will: - Be a professionally qualified engineer (preferably CEng) or someone approaching this level in their career - Be experienced working in both a design and construction environment. - Have a background in civil engineering, although other sectors can be considered. This client is a leading civil engineering and construction company mainly operating within the water industry. This is a fast growing business with over 250 new people joining the team in 2016 and further increase planned for 2017. Investing in employees is a priority with over £1m spent on training and development last year ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

15/09 - Engineering Team Member Nights    Location: North Halifax West Yorkshire Calderdale ... Jobs

Key points: We are seeking to employ and looking for an Engineering Team Member to be working with our prestigious, Halifax based client on a permanent basis. Overview Following all Health & Safety procedures at all times. To give a pro-active approach to the prevention of equipment failure and ensuring the schedule PMs are complete as planned. Support the production and engineering functions with machine care, breakdown & repair projects and development as required. Ensure Quality, Waste and Efficiency targets are met by working as an integral part of the manufacturing team. Key responsibilities 1. Carry out work assignments issued by Lead Engineer and maximise successfulness of the shift at all times by ensuring efficient completion of tasks. 2. Compliance with Company policies, procedures and regulations (e.g. attendance, quality, safety, GMP) and ensure these are followed to the required standard. 3. Support the development and implementation of balanced PPM schedules across the network. 4. Supports the Engineering Planning Process and deputises for the Engineering Planner 5. Demonstrate a team approach with regard to maintenance and hygiene of equipment and support operators and operations team. 6. Follow all work instructions and procedures at all times. 7. Ensure that all Work Orders and PPMs issued to the shift are completed and signed off in CMMS. 8. Work with other functions as part of the manufacturing team to make sure efficient running of assets and carry out prioritised work as agreed. 9. Compliance with Company policies, procedures and regulations (e.g. attendance, quality, safety, GMP) and ensure these are followed to the required standard. 10. Resolve mechanical and/or electrical problems in a timely fashion. 11. findand examineproblems before crises and determine appropriate action and follow-up. 12. Apply structured problem techniques to help findthe root cause of asset failures. 13. Ensure all parts removed from stores is following stock movement process, replenishment orders are complete without fail. 14. give the Lead Engineer with information on all engineering downtime attended on shift, related quality issue, work orders completed PMs completed and other details as required. 15. Supports CAPEX projects from the implementation and design phase through to execution & completion. 16. Deputise for Engineering Team Leaders and takes responsibility for the engineering team on shift. 17. Supervise contractors attending site and ensure the correct Contractor Control documentation is completed and issued. 18. Complete Permit to Work system when appropriate. Person Specification Qualifications GCSE or equivalent. (A to C qualifications. Maths & English required) ONC/HNC or equivalent. Possess 17th Edition Certification (electricians) Experience Electrical and/or mechanical qualifications / time served apprenticeship. 3 Years practical knowledge of working in an automated production environment. A good s ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

14/09 - CNC Spring machine setter Manufacturing / Engineering Skipton ...    Location: North East Skipton North North Yorkshire West Yorkshire ... Jobs

Key points: CNC Spring machine setter - Manufacturing / Engineering - SkiptonGenerous salary, negotiable depending on experienceHours 15.30pm - 02.00 am Mon - Thurs, 32 days holiday p/aAn industry leading manufacturer of springs and wireforms, is seeking a CNC spring machine minder / setter to be working with their close knit team working the late afternoon / evening shift.Your primary role will be to run CNC spring coiling machines from technical drawings, sketches and samples.A successful applicant is methodical, with a great amount of attention to detail. All jobseekers must be computer literate and be able to quickly learn new systems. earlier work experience on CNC machines of any sort will be a great advantage.Requirements for the vacancyrequired:Experience in a manufacturing engineering working environmentA good communicator and able to work on your own initiative.Have knowledge of measuring using a Vernier and Micrometer.Computer Literate.Desirable:Prior experience of CNC machinesFork Lift Truck LicenseKnowledge of springs.Knowledge of wire. We do try to respond personally but if you have not heard from us within 3 working days then accept that your application is not going to proceed further. ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

13/09 - Systems Engineering Apprentice    Location: North Rotherham West Yorkshire ... Jobs

Key points: Job title: Systems Engineering ApprenticeReference no: 1711682About PearsonAt Pearson we re committed to a global that s always learning and to our gifted team who makes it all possible. From bringing lectures vividly to life to turning textbooks into laptop lessons, we are always re-examining the way people learn best, whether it s one child in our own backyard or an education community across the globe. We are bold thinkers and standout innovators who motivate each other to explore new frontiers in an environment that supports and inspires us to always be better. By pushing the boundaries of technology.and each other to surpass these boundaries.we create seeds of learning that become the catalyst for the global s innovations, personal and global, large and small.About ApprenticeshipsOur mission is to develop a programme that will help Pearson its employees and its managers to progress in their lives and careers through the high quality Apprenticeships that we at Pearson provide.We are proud to launch our new Apprenticeship Programme, offering a range of Apprenticeships in Business Administration Customer service, management, digital industries & IT, Financial services and more. Our apprenticeships range from level 2 through to degree level and we have intakes throughout the year.As the global s learning company, we understand the skills and knowledge required to empower you to succeed in learning.Pearson believe that learning opens up opportunities, creating fulfilling careers and better lives. If you re as passionate about apprenticeships as we are, then do visit our website to find out more and see the full list of apprenticeships we have on offer: http://pearson.jobs/Background Information:The Engineering Department is responsible for ensuring all equipment related to the scanning of Pearson examination papers is maintained to the highest level in order to adhere to the required scanning schedule.Purpose:The Apprentice Systems Engineer role is to give support to the Engineering Department which will involve maintenance and repair of high speed image scanners and other equipment such as conveying equipment, paper trimmers, compressors and extractor system.Key Accountabilities:Provide support to the Engineering Department which will involve the following duties relating to:Scanners:To do repair work that includes troubleshooting, isolating and replacing faulty components, at times working to tight time scales.To carry out routine preventative maintenance.To do functional tests on a variety of electronic and electromechanical assemblies.To carry out mechanical rebuilding of equipment on a scheduled basis.To carry out fault tracking using the company s software and hardware systems.To carry out diagnosis of image quality issues using in built software and maintenance utilities. Conveyors, trimmers, compressors and extractor:To give first line support involving mechanical repair work.Liaising with contractors where it pro ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

13/09 - Site Agent Civil Engineering    Location: North West Yorkshire Leeds Jobs

Key points: As a jobseeker are you a civil engineering Site Agent who is available immediately? As a jobseeker are you capable of running a site, some engineering and all site paperwork (RAMS etc)? The prospective employer are currently employing for a Site Agent on a civils site in Leeds. We really need someone who is a fully experienced running contracts safely, on time and on budget. the agreementis external works and groundworks, nothing very complicated but needs to be run efficiently and well with the client close by. The role will include: Full site management responsibilityQA workmanaging health and safety on siteWorking as part of the managers and management personnel and attending weekly management meetings The minimum qualifications would be CSCS card SMSTS and strong civils experience.The prospective employer are offering a good pay rate, a medium term role and a position within a large construction company. To be considered for this role send cv online or find and message me on linked in (Damian Aston) Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or extra arrangements as required to help your application. Candidates must be qualified to be located and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment organisationand when advertising temporary/contract vacancies we are acting as an Employment Business. ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

13/09 - Estimator Civil Engineering £50,000    Location: North Leeds West Yorkshire Jobs

Key points: A major client located in Leeds is in the market for an Estimator who has experience in the clean water industry. Experience in other areas of civil engineering would be helpful as they agree a diverse range of projects when required. Vacancy responsibilities: - Liaise with clients, attending meetings, interviews & presenting estimates - Prepare Bill of Quantities & take offs from project documentation - Estimate tenders & schedules of work - keepcost database and back-up data - Compliance check sub-contractor offers - Oversee projects from start to finish - Follow up on declined tenders & review future costing strategies This client is an established and leading civil engineering and construction company mainly operating within the water industry. This is a fast growing business with over 250 new people joining the team in 2016 and further increase planned for 2017. Investing in employees is a priority with over £1m spent on training and development last year. ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

12/09 - Engineering Technician    Location: North East North Yorkshire Malton ... Jobs

Key points: Engineering TechnicianOur chosen business partner are focused on establishing leading market positions by providing innovative construction systems and solutions with a global reach. Within their mainarea of business, they have established an enviable position as a global leader in the design and manufacture of high quality facade systems.Key Vacancy responsibilities React quickly to plant breakdown situations when notified by production and give timely, robust solutions to return plant to full productivity.Ensure compliance with planned maintenance strategies for plant and equipment.Attend briefs to make sure continuity and quality of work across all shifts.Recommend and support value added improvement initiatives where appropriate.to help the manufacturing process by being proactive on the correction and modification of reoccurring machine dealing with faults.Make Plant Engineers aware of any machine issues and aid with stock control by reporting potential shortages.Maintain high standards of craftsmanship, HSE awareness and housekeeping in all work areas.Attend educational courses, workshops, training etc. to develop technical knowledge and abilities.Carry out modifications and installation work where required to continually improve plant reliability, safety and process quality.Key Requirements HND/City and Guilds/NVQ level 3 or equivalent qualified in Engineering with 17th Edition (electrical) and at least 3 years' experience in a high volume manufacturing environment. Significant and demonstrated experience in complying with planned and preventative engineering strategies.Must be able to show a diverse skill set encompassing electrical skills / knowledge and at least one other maindiscipline e.g. mechanical or controls / PLC. Fault finding and rectification skills on a range of equipment.Excellent organisational, planning and time management skills with a can do attitude and the skillto work autonomously an absolute must.Ability to use clear judgment and make methodical decisions in ambiguous and pressurised situations. Search is an equal opportunities recruiter and we welcome applications from all suitably qualified or qualified jobseekers, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age. ..........

Email this Job .... to a friend or your Home computer and apply later. Click here

 

Engineering vacancies in Yorkshire: Jobs above: 1-20 | Next of 1989 Jobs found

Increase your job chances and Register now for all the future Engineering Jobs in Yorkshire 

- Takes 2 mins - New jobs by Email as soon as they are posted onto the internet - Let Employers find you!!!!

Disclaimer & Cookie Information

Jobs by location

Jobs by type

AmberJobs © 2011