Amber Jobs Home - Yorkshire & Humberside - Job search in Hull for jobs. - Help . Advertise . Contact . Disclaimer

Share This Page on Facebook


Email this page to a friend

You can send this page to a friend or perhaps your home computer so you can look again later?
Your email is not seen or processed by us. When you click this link you will simply be forwarded to your own private email account on your computer. Details of a link to this page will appear.

It is 100% safe!


As well as jobs in Hull find on Amber Jobs a range of vacancies such as jobs in Beverley, jobs in Goole and Cabinet Jobs in Cottingham. Also Welder vacancies in Immingham.

Increase your job chances and Register now for possible future

Joiner Jobs in Hull

 

- Takes 2 mins - New jobs by Email as soon as they are posted onto the internet - Let Employers find you!!!!


Jobs updated:

 

Over 100,000 jobs nationwide

Also try....: Part Time Joiner Jobs in Hull * Did you mean....: Joiner Jobs in West Midlands | Joiner Jobs in East Midlands

Joiner jobs or similar/near:
Hull
Updated: 29/08/16


26/08 - Mechanical Fitter    Location: North East East Yorkshire Kingston Upon Hull North ... Jobs

Key points: Mechanical Fitter.Hull, North Humberside.A£29, 324 p.a. DoE + excellent and very attractive job benefits.Standby rota required for this role 1 week in 7.The Candidate will be expected to visit sites across the Yorkshire Region therefore a full valid and clean EU driving licence is sought..Your role as the Mechanical Fitter:.As the Mechanical Fitter the employee will be asked to work unsupervised in remote geographic locations and be responsiblefor the completion of planned and reactive ICA tasks within set time scales and quality and cost parameters. The Candidate should be confident in managing and prioritising your own workload successfully and building and maintaining strong working relationships, this role involves identifying hazards, providing mitigation and ensuring causes of hazards are removed so experience in this area is sought..Key responsibilities of the Mechanical Fitter:.A Supervising agreementpartners.A Providing risk assessments and method statements.A Capture your workload and job status using Toughbook.A Assist in the development and training of apprentices and less experienced team members.A Identifying ways to improve the value of our services.A Install and commission new plant and equipment to relevant standards.A Diagnose and repair faults.A Proactively findand report follow on work areas for enhancement.A Specify parts and equipment required for repairs / procurement.What skills do our Mechanical Fitters need?.It is an required requirement that you hold a recognised Mechanical craft/Technician Apprenticeship and either a City & Guilds/ ONC/ BTEC/ NVQ/ HNC/ HND or equivalent in Mechanical Engineering or Eng Tech..It is a mandatory requirement that you can demonstrate experience and knowledge in:.A Safe isolation to the current IET regulations.A Time served industrial mechanical fitter.A Working with rotating equipment.A skillto produce maintenance reports.A Fault finding on mechanical systems. Desired requirements:.A HNC in a Mechanical discipline.A BS coded welder.A CompEx 11.A HNC Electrical/Electronic Engineering.A Maintaining and repairing centrifugal, positive displacement, RAM, progressive cavity, diaphragm, peristaltic pumps.A With gearboxes.A With compressors.A Maintaining equipment in accordance with PSSR.A With blowers.A Working with steam systems.A Working with chemical plant.A With hot work/ fabrication and welding.A Operating lifting equipment and slinging.A Pneumatics and hydraulics. Ideally, you will have earlier work experience gained within the water or waste water sectors or within the broader utilities, process or manufacturing industry sectors. Experience within a mechanical based environment or site based fault diagnosis and repair on complex processes and equipment..What do you get in return?.Career enhancement and development, colleague well-being and a genuinely positive work experience for all are key priorities. This is a 'gateway' role that subjec ..........

Full Details.... - Click Here   

Email this Job .... to a friend or your Home computer and apply later. Click here

27/08 - Multi Skilled Engineer (Plumber Bias)    Location: North East Yorkshire Kingston Upon Hull ... Jobs

Key points: Multi Skilled Engineer (Plumber Bias) required in Hull area.

Client Details

Opportunity to be working with a large support services company, for a Multi Skilled Engineer (plumber Bias) in the Hull area.

Description

The Multi Skilled Engineer (Plumber Bias) will deliver a combination of primarily Water Systems skill sets and basic electrical, mechanical, water and building fabric for planned reactive and extra works within engineering across either Static, mobile or a regional / multiple client sites ensuring delivery of a safe, customer focused cost successful, efficient and compliant service in order to meet contractual and legal obligations. The Candidate will also be responsible for ensuring the safety and wellbeing of yourself, colleagues, customers and visitors by Working in accordance with Work Instructions, Safe Working Practices and Method Statements ensuring relevant records (paper and electronic) are completed and submitted in an accurate timely manner. The Candidate will be expected to help the activity of expert service partners, delivering services on behalf of the company ensuring all health, safety and environmental requirements are adhered to. Including, but not limited to, ensuring adequate safe system of works are complied with, complete task specific risk assessments when required and carry out Point of Work risk assessments for all activities. Your duties will include (but not be limited to) Working on own and as part of a co-ordinated group, carrying out routine PPM, reactive and minor repair works as assigned by the Workflow team ensuring all deliverable SLA/KPI targets are met or exceeded and Performing all work to specification meeting the required standards. The Candidate will also be expected to install new plant and equipment when required Be proactive in reporting faults to equipment, buildings and fittings. and keepthe cleanliness of plant rooms, workshops and storage areas.

Profile

- Competent in Plumbing/Water systems and Fabric, with basic knowledge of electrical, mechanical

- Behave in line with and promote company values

- Demonstrate a willingness to attend training courses

- Able to be flexible to working patterns, when required

- Good Health and Safety Knowledge

- Have worked in a similar role previously

Job Offer

Full time position with good salary and private health care. £22k - £30k pa ..........

Full Details.... - Click Here   

Email this Job .... to a friend or your Home computer and apply later. Click here

23/08 - Mechanical Installation Engineer / Mechanical Fitter ...    Location: Yorkshire Kirklees Huddersfield North West Yorkshire ... Jobs

Key points: Company InformationThe prospective employer is a fastly expanding Huddersfield based engineering company with their own specialised range of equipment primarily within the pharmaceutical sector. They now require a talented and knowledgable Mechanical Installation Engineer who is willing to work away from home. This really is a motivating and challenging job opportunity for jobseekers who are interested in working away from home and international travel. The prospective employer's recent projects have been in countries such as India, Australia, New Zealand and Denmark. All travel and accommodation is fully expensed. Job DescriptionThe Mechanical Installation Engineer / Mechanical Fitter will be responsible for:Installation and commissioning of new equipment at customer facilitiesEngage with clients, understanding their needs and offering exceptional customer serviceConduct diagnostic testing, troubleshooting and repair of customer equipment.Ensure all company equipment is properly maintained and in good working order at all times.Ensure compliance with H + S guidelines and company policy and proceduresPerson Specification skillto read and interpret technical drawings.Site installation and commissioning ability.Electrical knowledge would be an advantage but not required Able to work to deadlines and supervise installation crew Full, clean driving licence Able work away from home on a steady basis full valid passport requiredKeywords: Mechanical Engineer Mechanical Fitter Commissioning EngineerAs soon as a decision has been reached we will contact shortlisted jobseekers to planinterviews.Unfortunately due to the high volume of applications we receive we are unable to notify unsuccessful jobseekers..This job was initially submitted as www.totaljobs.com/job/66353086 ..........

Full Details.... - Click Here   

Email this Job .... to a friend or your Home computer and apply later. Click here

12/08 - Gas Fitter    Location: Doncaster Yorkshire North West Yorkshire ... Jobs

Key points: A Gas Fitter job in Doncaster paying £14.96 PAYE (inc holiday pay) on a social housing contract. Your new company The Candidate will be working as a temporary Gas fitter for a social housing company that have around 20k properties in the Doncaster area..Your new role The Candidate will be dealing with and working on void and occupied properties along side other trades. Some of the responsibilities will include installing or maintaining heating systems, fitting appliances and emergency repairs. What you'll need to succeed The Candidate will need the relevant qualifications and tickets for this new vacancy, with experience working on social housing..What you'll get in return The Candidate will be paid £14.96 PAYE (inc holiday pay) on a weekly basis with the opportunity of long term work..What you need to do now If you're interested in this role, click 'make an application today' to send an up-to-date copy of your CV, or call us now. If this new vacancy isn't quite right for you but you are seeking to employ and looking for a new position Contact us for a privatediscussion on your career.Hays Specialist Recruitment Limited acts as an employment organisationfor permanent recruitment and employment business for the supply of temporary workers. By applying for this new vacancy you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk.This job was initially submitted as www.totaljobs.com/job/66331340 ..........

Full Details.... - Click Here   

Email this Job .... to a friend or your Home computer and apply later. Click here

29/08 - Joiner jobs in Hull

Register so that employers can look for you. Many companies are now using CV banks and an effective way for you to proceed is to register your CV so they can find you.

Machine Tool Fitter

Location: Leeds West Yorkshire Jobs

Key points: Machine Tool Fitter Leeds Temp to Perm DAYS The prospective employer in the Leeds area have an immediate requirement for a Machine Tool Fitter to carry our service and repairs to a number of manual and CNC Machine Tools. Only candidates well versed in Machine Tool Maintenance need apply. The majority of this role will be based on site but some travel maybe involved to customer sites. This role will become full time after a 12 week probationary period. the employee will steady days and will receive an hourly rate of £11.25 per hour. Please send CV's to ..........

Full Details.... Machine Tool Fitter

***************************

Increase your job chances and Register now for all the future Joiner Jobs in Hull 

- Takes 2 mins - New jobs by Email as soon as they are posted onto the internet - Let Employers find you!!!!

***************************

Popular Searches on Amber:

Part Time Jobs in Hull  Sales Jobs in Hull  Shop Jobs in Hull  Accountancy Jobs in Hull 
Banking Jobs in Hull  Teaching Jobs in Hull  Construction Jobs in Hull  Nursing Jobs in Hull 
Cashier Jobs in Hull  IT Jobs in Hull  Telecomms Jobs in Hull  Software Engineer Jobs in Hull  Mechanical Engineering Jobs in Hull  Driving Jobs in Hull  Medical Jobs in Hull  Joiner Jobs in Bradford   |   Joiner Jobs in Doncaster   |   Joiner Jobs in Grimsby   |   Joiner Jobs in Halifax   |   Joiner Jobs in Harrogate   |   Joiner Jobs in Huddersfield   |   Joiner Jobs in Hull   |   Joiner Jobs in Knaresborough   |   Joiner Jobs in Scarborough   |   Joiner Jobs in Sheffield   |   Joiner Jobs in Leeds   |   Joiner Jobs in Whitby   |   Joiner Jobs in Grimsby   |   Joiner Jobs in Scunthorpe   |   Joiner Jobs in Castleford   |   Joiner Jobs in Goole   |   Joiner Jobs in Rotherham   |   Joiner Jobs in Barnsley   |   Joiner Jobs in York   |  

Joiner jobs in the area of Hull

24/08 - PLANT FITTER MANAGER    Location: North West Yorkshire Leeds Jobs

Key points: Position: Workshop Fitter Supervisor

Type: Permanent
Term: Full time
vacancy referenceerence: RCCWDN5537-72
Remuneration is Around £26, 000 - £28, 000 Basic and Extras

The employer are seeking to employ and looking for a talented and knowledgable Workshop Supervisor for their Leeds Depot,

The successful jobseeker for this new vacancy will be

Responsible for repair and maintenance of all types of plant and tool equipment.

Experienced in both Mechanical and Electrical backgrounds

The Candidate need to be self motivated and be able to turnaround machines quickly with accuracy and you will also be responsible for ensuring the machinery is fit for hire.

As a fully qualified plant & tool mechanic, you will need to be able to Demonstrate a full and varied knowledge of all plant

Be able to give references to supplement your application.

Having a CSCS card would be an advantage
The Candidate need to have good spoken and written English as the vacancy requires technical paperwork to be filled in for service and repair sheets.

Experience within a senior or supervisor role would be advantage Up to £27, 000 + Extras ..........

Full Details.... - Click Here   

Email this Job .... to a friend or your Home computer and apply later. Click here

   
24/08 - Bridalwear Seamstress / Fitter    Location: North Leeds West Yorkshire Jobs

Key points: Berketex Bride is the largest independent Bridalwear retailer with stores nationwide, carrying exclusive designs from the best bridalwear designers in the global. We would like to hear from potential Bridalwear Fitters, Seamstresses and Alterationists for our prestigious store in Leeds city centre. Your role will include the fitting of the gown to the bride and may also include the undertaking of the subsequent alterations. The role will include dealing with Bridal parties during the 'Fitting phase of the Bridal Gown experience. This role is based on working a 5 day shift possibly including Saturdays and some Sundays, although applications for part time roles (including Saturdays and some Sundays) will be considered. The Candidate will already have significant experience in a garment fitting, sewing or alterations role perhaps with another ladies fashion or Bridalwear outlet, or maybe as an independent fitter seamstress or garment alterationist. Full product training will be given. The remuneration package includes a generous pay with benefits appropriate to the vacancy. Berketex Bride recruits solely on the grounds of merit. Berketex Bride is committed to equal opportunities in all its employment practices, policies and procedures and seeks to prohibit unlawful discrimination on the grounds of an applicant s sex, marital status, race, colour national or ethnic origin and disability. However the employee will be asked to give evidence of your legal right to work in the UK. Please indicate your current salary and notice period on your application. This role is exempt from the Equality Act 2010 ..........

Full Details.... - Click Here   

Email this Job .... to a friend or your Home computer and apply later. Click here

Vehicle Interior Fitter (Commercial Vehicles)

Location: Dewsbury West Yorkshire Jobs

Key points: Vehicle Fitter West Yorkshire the employee will be an experienced commercial vehicle fitter and have served an apprenticeship - preferably in vehicle fitting or fabricating and welding. Duties to include fitting flooring, plywood wall panels, metal cupboards, compartments and shelves. Fabrication and tig welding skills would be an advantage. Vehicle Fitter West Yorkshire This vacancy is being advertised by Major Recruitment operating as an Employment Agency ..........

Full Details.... Vehicle Interior Fitter (Commercial Vehicles)

Maintenance Fitter (CNC Machine Tools)

Location: Huddersfield West Yorkshire Jobs

Key points: Position: Maintenance Fitter - Machine Tool Location: Huddersfield Salary: £Negotiable + Shift Allowance + Company Pension + Healthcare + Additional Benefits Duration: Permanent Shift: Days/Nights - Days: Monday-Friday, Nights: Monday-Thursday Overview To provide maintenance support to Plant operations, specifically in the maintenance of Assembly Lines and Machine Tools. To maintain repair and recommend improvements to existing machines, plant, equipment and facilities. Help maintain the maintenance asset management system (Maximo) Including TPM activities. Key Vacancy responsibilities:
* Ability to show a level of problem solving techniques, root cause analysis.
* Use of Asset Management tool for record keeping.
* Perform all the duties of Mechanical Maintenance.
* Suggest spare parts stocking.
* Support Team-working.
* Specify detail of spare parts and components.
* To be proactive and suggest initiatives and improvements to our TPM system.
* Follow Apprentice training procedure.
* Ongoing training and follow OEM training.
* Understand business priorities and focus on key activities as directed by supervision. (Maintenance and Plant)
* Willingness to learn new skills, keep up to date with current technologies.
* Work to company industry standards and current regulation standards.
* Attend meetings.
* Ability to stand in for senior technician in their absence and emergency situation
* Support maintenance supervision to maintain PPM Targets / KPI.
* Support safety initiatives. Experience /Education/Qualifications Experience in a recognised engineering industrial trade (Mechanical engineering / Machine tool fitting) and preferred 2 - 4 years recognised Mechanical maintenance Apprenticeship training. NVQ (National Vocational Qualification) - level 3 or equivalent. Minimum City and Guilds level 3 in a mechanical discipline. Ideal, EAL Advanced Diploma or equivalent . ( ONC.) ..........

Full Details.... Maintenance Fitter (CNC Machine Tools)

Machine Tool Maintenance Fitter

Location: Rotherham South Yorkshire Jobs

Key points: Title: Machine tool Maintenance Fitter/ Engineer Location: Sheffield, Rotherham Status: Permanent, Days only £11.00 basic per hour, potential overtime premiums (£22, 300 + Overtime) My client is looking to appoint a permanent Machine Tool Maintenance Fitter/ Engineer who has Mechanical engineering qualifications and/ experience working on repairing CNC machinery. requiredly the successful Machine Tool Maintenance Fitter/ Engineer will have CNC Machine Tool Maintenance experience due to the day to day duties expected; repairing lathes, millers, horizontal borer machines and all other mechanical equipment/ machines on site. Will need to be HNC or equivalently qualified, main skills are in CNC Machine Tool Mechanical repairs and maintenance. Machine Tool Maintenance Fitter selected will coordinate all Manufacturing & Engineering maintenance activities on site. Ensure all work is carried out in compliance with relevant H&S and Environmental requirements. Good all-rounder with knowledge of mechanical repairs and installation, pneumatics, cnc machinery. Carry out routine planned servicing on plant & CNC equipment. Carry-out breakdowns and repairs, fault find, strip cnc machines and complete all mechanical checks and repairs, working closely with electrical maintenance engineer/s on site. Organising planned preventative maintenance (ppm). Maintain appropriate spare parts inventory to ensure repairs are dealt with quickly and efficiently. Carry out utility monitoring and reporting duties. Introduce TPM (time preventative maintenance) to production cells. Ensure COSHH testing is carried out. Experience of managing your own workload. Good understanding of Health & Safety ..........

Full Details.... Machine Tool Maintenance Fitter

27/08 - Maintenance Fitter/Supervisor    Location: Goole North East Yorkshire East Riding of Yorkshire ... Jobs

Key points: Stobart Group has an opportunity for a Maintenance Fitter/Supervisor to be working with their team located in Pollington. We are offering a generous pay of £25, 000 to £29, 000 depending on experience.

Stobart Group is an Infrastructure and Support Services business operating in the biomass energy, railway maintenance and aviation sectors as well as having investments in a property and logistics portfolio.

What's the Maintenance Fitter/Supervisor role?

- To operate and keepvarious wood dealing with equipment in a safe and efficient manner.

- To plan and organise maintenance programs for plant and equipment

- To plan and plan3rd party repairs and maintenance

- To raise purchase orders

- To exercise caution at all times and report any accidents or incidents immediately to site management

- To co-operate with management to maximise site dealing with capabilities.

- To work as a fully engaged and flexible member of a small operating team

- To work shift patterns that could be subject to change depending upon the business need.

What will I be responsible for as the Maintenance Fitter/Supervisor?

- keepand repair all site based plant equipment

- planand plan servicing schedules for plant equipment

- planwhere require 3rd party repairs to equipment

- Raise and supply purchase orders

- Control and order spares when required

- Operating a variety of machinery in a safe and efficient manner. (Only machinery that you have been fully trained and signed off to operate).

- Use all appropriate PPE. (supplied and required training provided)

- Report any accidents or incidents immediately to your team leader or site management.

- Report any machinery defects or issues immediately to your team leader or site management.

- Ensure machinery is maintained as per the manufacturer's recommendations.

- Always be aware of the sites Environmental responsibilities. (Training will be provided)

- Abide by all company procedures, policies and protocols

- Attend training courses as required.

- keepyour working area to a high standard

- Always conduct yourself in a polite and professional manner

- Carry out extra tasks as reasonably requested.

The successful Maintenance Fitter/Supervisor will be rewarded with a package including company pension scheme and uniform.

If you have the skills and experience to become our Maintenance Fitter/Supervisor click 'Apply' now. £25, 000 - £29, 000 per year ..........

Full Details.... - Click Here   

Email this Job .... to a friend or your Home computer and apply later. Click here

25/08 - Mechanical Fitter    Location: Doncaster Yorkshire North West Yorkshire ... Jobs

Key points: Mechanical Fitter - Doncaster - £13.35ph - £14.96ph - IMMEDIATE START - 3 month assignment initially, possibility to last longerMUST HAVE QUALIFICATIONS TO PROVEVenatu Consulting are currently working in partnership with The prospective employer in looking for a number of Mechanical Fitters to be working with their company and business on an 3 month assignment which may last longer.Vacancy responsibilitiesMaintenance of vehicles, machinery and equipment.Carry out repairs on commercial vehicles.Working in a dynamic shop floor carrying out duties as required.Work to targets and deadlines.Requirementsrequired:Either an apprentice taught and trained engineer or mechanical qualification with a minimum of 3 years practical experience. MUST HAVE QUALIFICATIONS TO PROVE.Mechanical experience.Competent in Maths and English.Experience of using tools.Ability to work to targets.Physical Aptitude.Desirable:Rail Heavy Maintenance experience.Experience of using measuring equipment.Experience in working in a company where continuous improvement is utilized.HoursWorking on a rotating shift basis of one week days and one week afters.Monday - Thursday 6am - 2:15pm or 2pm - 10:15pm.Friday 6am - 12pm or 11:45am - 5:45pm.Pay: £13.35 per hour which includes 12.5% shift pay for working rotating shifts.This job was initially submitted as www.totaljobs.com/job/66440764 ..........

Full Details.... - Click Here   

Email this Job .... to a friend or your Home computer and apply later. Click here

 

Joiner vacancies in Hull: Jobs above: 1-12 | 12 Jobs found

Increase your job chances and Register now for all the future Joiner Jobs in Hull 

- Takes 2 mins - New jobs by Email as soon as they are posted onto the internet - Let Employers find you!!!!

Disclaimer & Cookie Information

Jobs by location

Jobs by type

AmberJobs © 2011